How do electroplating equipment manufacturers maintain their equipment?
If the equipment is planned to be shut down for a long time, maintenance should be carried out so that it will not be corroded and aged during the shutdown process. Clean the ground, clean the water on the ground, keep the ground dry, keep the machine, tank, driving, and pendant clean and dry; all motors are protected with plastic wrap; all bearings are injected with grease to prevent rust; all medicines in the pipelines are cleaned; remove the filter element, clean all heaters in the tank, remove dirt, and keep dry.
High-efficiency and fast electroplating equipment can electroplate multiple workpieces at the same time. In addition, stirring the liquid medium during the electroplating process can speed up the electroplating of the workpiece. At the same time, stirring the electroplating, filter out impurities from the liquid medium from the electroplating box, always adhere to the purity and quality of the electroplating, and greatly improve the efficiency of the electroplating. High-efficiency and fast electroplating equipment includes an electroplating box, an impurity filter and an agitator. The electroplating box is placed on the rack and the electroplating box cover is placed on the upper end.
The contact points are sealed, and multiple negative poles and electroplating workpieces are arranged on the upper end of the electroplating box cover. The lower ends of the negative poles and the electroplating workpieces extend to the electroplating box. The electroplating box is filled with electroplating liquid medium. The lower ends of the negative poles and the electroplating workpieces are immersed in the liquid. A row of agitators are arranged at the lower end of the electroplating box. The blade part of the agitator is in the liquid medium, and the driving part is fixed on the frame. A pipette is provided at one end of the electroplating box.
A one-way valve is provided at the connection between the electroplating box and the suction pipe. The other end of the suction pipe is connected to the lower end of the impurity filter, and the upper end of the impurity filter is connected to the suction pump. The output end of the suction pump is connected to the electroplating box through a row. The impurity filter and the suction pump are placed on the pump support seat, and the pump support seat is fixed on the outside of the electroplating box.
Printed circuit board production uses electroplating equipment. Due to different production processes and different manufacturers, there will be certain differences in equipment. Therefore, there will be some differences in maintenance methods, but the equipment must be maintained in a timely and correct manner. It is not possible to catch up with the production schedule and production and ignore equipment maintenance. Only correct and timely maintenance can ensure the normal operation of the equipment, stable performance, and production and quality.